banner
Our main products are electrophoresis cell, electrophoresis power supply, blue LED transilluminator, UV transilluminator, and gel imaging & analysis system.

Electrophoresis Cell

  • Wholesale Vertical Electrophoresis System DYCZ-22A

    Wholesale Vertical Electrophoresis System DYCZ-22A

    DYCZ-22A is a single slab vertical electrophoresis cell used for separating, purifying and preparing protein charged particles. It is a single plate structure product. This vertical electrophoresis tank is very economical and easy to use. 

  • Wholesale Tube Gel Electrophoresis System DYCZ-27B

    Wholesale Tube Gel Electrophoresis System DYCZ-27B

    DYCZ-27B tube gel electrophoresis cell is used together with electrophoresis power supply, it is designed for years of reproducible and rigorous use and is suitable for performing the first phase of 2-D electrophoresis (Isoelectric Focusing – IEF), allowing 12 tube gels to be run at any one time. 70 mm high middle ring of the electrophoresis cell and the gels differ in the length of the tubes that are 90 mm or 170 mm long, allow a high degree of versatility in separation desired. DYCZ-27B tube gel electrophoresis system is easy to assemble and use.

  • Protein Electrophoresis Equipment DYCZ-MINI2

    Protein Electrophoresis Equipment DYCZ-MINI2

    DYCZ-MINI2 is a 2-gel vertical electrophoresis system, includes electrode assembly, tank, lid with power cables, mini cell buffer dam. It can run 1-2 small size PAGE gel electrophoresis gels. The product has advanced structure and delicate appearance design to ensure the ideal experiment effect from gel casting to gel running.

  • 4 Gels Vertical Electrophoresis Cell DYCZ-25E

    4 Gels Vertical Electrophoresis Cell DYCZ-25E

    DYCZ-25E is a 4 gels vertical electrophoresis system. Its two main body can carry 1-4 pieces of gel. The glass plate is optimized design, greatly reduce the breakage possibility. The rubber chamber is installed in the electrophoresis core subject directly, and a set of two pieces of glass plate is installed respectively. Operation requirement is very simple and accurate limit installation design, make high-end product simplification. Tank is beautiful and transparent, the running status can be shown clearly.

  • Modular Dual Vertical System DYCZ – 24EN

    Modular Dual Vertical System DYCZ – 24EN

    DYCZ-24EN is used for SDS-PAGE, Native PAGE electrophoresis and the second dimension of 2-D electrophoresis, which is a delicate, simple and easy to use system. It has the function of “casting gel in original position”. It is manufactured from high transparent poly carbonate with platinum electrodes. Its seamless and injection-molded transparent base prevents leakage and breakage. It can run two gels at once and save buffer solution. Its power source will be switched off when user opens the lid. This special lid design avoids making mistakes and is very safe for user.

  • Dual Vertical Electrophoresis Cell DYCZ-30C

    Dual Vertical Electrophoresis Cell DYCZ-30C

    DYCZ-30C is used for SDS–PAGE, Protein Electrophoresis,particularly suitable for seed purity test or more sample of protein electrophoresis.The tank body is moulded, high transparent,and no leakage; Its double clamp-plate that can cast two gels at one time. With different teeth of combs, it can run different number of samples.

  • Protein Electrophoresis Equipment DYCZ-MINI4

    Protein Electrophoresis Equipment DYCZ-MINI4

    DYCZ-MINI4 is a vertical mini gel electrophoresis system designed for fast, simple and rapid protein analysis. It runs both handcast gels and precast gels in different thicknesses, and can up to four precast or handcast polyacrylamide gels. It is durable, versatile, easy to assemble. It includes casting frames and stands, glass plates with permanent bonded gel spacers that simplify gel casting and eliminate leaking during casting.

  • Trans-Blotting Electrophoresis Cell DYCP – 40C

    Trans-Blotting Electrophoresis Cell DYCP – 40C

    DYCP-40C semi-dry blotting system is used together with electrophoresis power supply for fast transferring the protein molecule from the gel to membrane like nitrocellulose membrane. The Semi-dry blotting is performed with graphite plate electrodes in a horizontal configuration, sandwiching a gel and membrane between sheets of buffer-soaked filter paper that function as the ion reservoir. During the electrophoretic transfer, negatively charged molecules migrate out of the gel and move towards the positive electrode, where they are deposited on the membrane. The plate electrodes, separated only by the gel and filter paper stack, provide high field strength (V/cm) across the gel, carrying out the very efficient, rapid transfers.

  • DNA Sequencing Electrophoresis Cell DYCZ-20C

    DNA Sequencing Electrophoresis Cell DYCZ-20C

    DYCZ-20C is used for DNA sequencing analysis and DNA fingerprinting analysis, differential display and SSCP research. The system is simple and easy to install the tank. It is easy to cast the gel, and with its unique design of heat dissipation, it can keep temperature and avoid over heat during running. Clear signs on the glass to ensure correct operation. The electrophoresis band is neat and clear.

  • Nucleic Acid Horizontal Electrophoresis Cell DYCP-31BN

    Nucleic Acid Horizontal Electrophoresis Cell DYCP-31BN

    DYCP-31BN is used for identifying, separating, preparing DNA, and measuring the molecular weight. It is made of high quality polycarbonate that is exquisite and durable. It is easy to observe gel through the transparent tank.Its power source will be switched off when user opens the lid.This special lid design avoids making mistakes. The system equips removable electrodes that is easy to maintain and clean.Its black and fluorescent band on the gel tray makes it convenient to add the samples and observe the gel.

  • Nucleic Acid Horizontal Electrophoresis Cell DYCP-32B

    Nucleic Acid Horizontal Electrophoresis Cell DYCP-32B

    DYCP-32B is used for identifying, separating, preparing DNA, and measuring the molecular weight. It is suitable for 12-channel pipette use. It is made of high quality polycarbonate that is exquisite and durable. It is easy to observe gel through the transparent tank.Its power source will be switched off when user opens the lid.This special lid design avoids making mistakes. The system equips removable electrodes that is easy to maintain and clean.Its black and fluorescent band on the gel tray makes it convenient to add the samples and observe the gel.